---
title: "Guidewheel Alternatives (2026): 7 Options Compared"
description: "Seven Guidewheel alternatives scored on part counts, machine health, maintenance, scheduling, hardware and price, each rating sourced to the vendor’s own page."
source_url: "https://www.iotflows.com/compare/guidewheel-alternatives"
---
Compare

# Guidewheel alternatives, compared from each vendor’s own pages

Seven options for plants weighing Guidewheel, scored on what a power reading cannot tell you. Every rating rests on the company’s own published facts.

[Score them yourself](https://www.iotflows.com/compare/guidewheel-alternatives#scorecard)

Filters drawn from each company’s ratings below, from its own published facts.

The short answer

## Which alternative fits your plant? Start with what the sensor can see.

- 01

### Machines that idle under power?

SenseAi reads vibration, so a cut and an idle spindle look different. MachineMetrics reads the control.[45] Guidewheel’s own page: energised machines can read as running until thresholds are tuned.[5]

Best fit
- 02

### Part counts without a second sensor?

SenseAi counts parts from the same sensor that reports running and stopped. Guidewheel layers part counting on as another data source.[8]

Best fit
- 03

### Machine health, not just state?

SenseAi Embedded scores health against each machine’s own healthy baseline. Guidewheel: “It is not predictive maintenance.”[5]

Best fit
- 04

### Want maintenance and spare parts in one system?

The only one of the eight whose own pages list work orders and spare-parts inventory. Amper sells maintenance as an add-on.[16] Guidewheel “does not raise work orders”.[5]

Best fit
- 05

### Need a schedule for the floor?

Both sell drag-and-drop scheduling with automatic sequencing as an add-on.[47] Guidewheel leaves scheduling to the ERP.[7]

Best fit
- 06

### Want one price, before the demo?

All four publish prices on their pricing pages.[11],[27],[34] Guidewheel’s pricing page says custom quote; its landing pages say from $15,000 a year.[1],[3]

Best fit

What the sensor sees

## More than a power reading

SenseAi reads vibration on the machine itself, so a cut, an idle spindle and a finished part each look different. It counts parts and, on SenseAi Embedded, scores machine health from the same sensor, on hardware we design, firmware and all.

Its own page: machines that stay energised between parts “can read as running when they are idle, until the thresholds are tuned”.[5]

[IoTFlows vs Guidewheel](https://www.iotflows.com/compare/iotflows-vs-guidewheel)

Score them yourself

## What matters to your plant? Set it, and the ranking follows.

Pick a preset, or drag any bar to set how much it matters, 0 to 10.

4

4

8

4

4

8

10

8

4

4

Your ranking

Whole plant · out of 100

- 194
- 731
- 444
- 2Amper (ECI)56
- 8Pulsar29
- 544
- 641
- 345

Every company is rated 0 to 10 on each line, from its own published facts; your weights decide how much each rating counts. If controller data is all you need, MachineMetrics comes first. The facts behind every rating are just below.

Behind the scores

## Every rating, with its source. Open any company.

How each criterion is rated

Cost · Lowest published plan, with required hardware spread over three years.

10Under $100 per machine a month8$100 to $1496$150 to $1995Not published

Time to first data · The slowest figure the vendor publishes.

10Minutes8Within a day or two7Days4Weeks

Machine versatility · How many of a mixed floor’s machines it reads, and how.

10Any machine, mounted on the outside8Any powered machine, sensor on its power cables6Machines with a signal to wire in5CNC controls first, others on a fallback4CNC controls; state only on others

Controller data · Program, alarm and count data read from the control itself.

10CNC controls and PLCs, natively8CNC controls, natively6Controls and PLCs as an add-on project5PLC integration offered4PLC tags through a partner add-on3One PLC output through a relay0None

Setup and IT effort · Higher means less work for maintenance and plant IT.

10Mounts outside; no electrical or network work8Clamps on power cables; cellular option6Wired inputs or a device per control, plant network3Cable and static IP per machine, firewall ports, IT

Scheduling · Included or as an add-on.

8Drag-and-drop with automatic sequencing6Job planning or a scheduling module4Work lists and CSV import2Through a partner0None found

Maintenance work orders · Included or as an add-on.

10A full CMMS built in7A maintenance module4Planned-maintenance tracking plus CMMS links3Through a separate CMMS0None found

Spare-parts inventory · Included or as an add-on.

10Built in, moved by work orders3Tooling only2Through the ERP0None found

Own hardware · Who designs the device that reads your machine, from its own pages.

10Designs its sensing device and the firmware on it8Designs its own logger or appliance; sensors bought in or the customer’s6Its own hub around stock parts; relay or router off the shelf5Not published on its own pages2Third-party devices

Published pricing · Can you see the price before a demo?

10Full prices on its website6A starting price on landing pages3Only on a marketplace listing0Not published

Whole plant 94

- CostFrom under $100 per machine a month on longer terms; SenseAi $149 once10/10
- Time to first dataCalibrates in under five minutes and reports right away10/10
- Machine versatilityA magnetic sensor on any machine, of any age or brand10/10
- Controller dataMTConnect, OPC UA and more through the edge device, on Enterprise6/10
- Setup and IT effortMounts magnetically; the 4G/LTE router keeps it off the plant network10/10
- SchedulingProduction Scheduler add-on: Gantt, optimizer, simulation8/10
- Maintenance work ordersMaintain: work orders, preventive schedules, meters, requests10/10
- Spare-parts inventoryInventory: parts leave stock when a work order closes10/10
- Own hardwareSenseAi, SenseAi Embedded and BeamTracker are designed by IoTFlows, firmware and all10/10
- Published pricingDevice and plan prices on the pricing page10/10

Whole plant 31

- CostFrom $15,000 a year for 10 machines before hardware and installation, which go on the order form at prices not published[1],[2]5/10
- Time to first data“As little as a day”[3]8/10
- Machine versatilityClip-on current sensors on the power leads[4]8/10
- Controller data“It reads power, not process”: no controller tags[5]0/10
- Setup and IT effortClip-on meters; LTE meters need no plant network[4],[6]8/10
- SchedulingLeft to the ERP[7]0/10
- Maintenance work orders“Does not raise work orders”[5]0/10
- Spare-parts inventoryNo inventory[5]0/10
- Own hardwareIts terms: hardware “purchased … from third party suppliers”[2]2/10
- Published pricingA starting price on landing pages; a custom quote on its pricing page[1],[3]6/10

Whole plant 44

- Cost£72 per machine a month billed annually, plus £200 per MachineLink[11]10/10
- Time to first data10 to 20 minutes per machine; data within days[12]7/10
- Machine versatilitySensors clipped around the power cables[12]8/10
- Controller dataNo connection to the controller[12]0/10
- Setup and IT effortFitted by your electrician; a managed 4G gateway option[11],[12]8/10
- SchedulingWork lists and CSV import[11]4/10
- Maintenance work ordersNo maintenance work orders found[13]0/10
- Spare-parts inventoryNo inventory found[13]0/10
- Own hardwareMaker of its MachineLink and SensorBox not published on its own pages[12]5/10
- Published pricingPer-machine prices on its pricing page, in pounds[11]10/10

Amper (ECI)Whole plant 56

- CostCustom quote, hardware included[14]5/10
- Time to first dataLive data within 48 hours of receiving hardware[15]8/10
- Machine versatilityNon-invasive electrical sensors; no PLC needed[15]8/10
- Controller dataPLC integrations among its capture options[16]5/10
- Setup and IT effortElectrical sensors on encrypted cellular; no plant network[15]8/10
- SchedulingScheduling add-on module[16]6/10
- Maintenance work ordersMaintenance management add-on: tickets from machine data[16]7/10
- Spare-parts inventoryInventory only as ERP data it feeds[15]2/10
- Own hardwareMaker of its sensors and boxes not published on its own pages[16]5/10
- Published pricingA custom-quote page, no price[14]0/10

PulsarWhole plant 29

- CostNo price published; every call to action is a demo[18]5/10
- Time to first dataOne visit to install; data within a few days[19]7/10
- Machine versatilityA current (amps) sensor on every machine, plus counters, relays and cameras[20],[21]8/10
- Controller dataNo PLC or controller protocol on its site, docs or API[21]0/10
- Setup and IT effortIts team installs clamps on each breaker’s cable and a hub in one visit, on a dedicated network and router[21],[22]8/10
- SchedulingShift schedules and operator planning only; no job scheduling found[23]0/10
- Maintenance work ordersNo work orders; its blog puts the CMMS in a separate system[24]0/10
- Spare-parts inventoryNo inventory or spare parts found[18]0/10
- Own hardwareIts own Smart Hub; its photos show an SSR-40 DA relay with a Pulsar label and a Teltonika router[21],[25]6/10
- Published pricingNo pricing page[18]0/10

Whole plant 44

- Cost$189 to $379 per machine a month, plus a $19 to $24 device per three machines[27],[28]6/10
- Time to first data“A few days, in three steps”[29]7/10
- Machine versatilityA new or existing sensor, or a PLC output through a relay[29]6/10
- Controller dataOne PLC output through a relay[29]3/10
- Setup and IT effortIts device on Ethernet or Wi-Fi, plus power[30]6/10
- SchedulingNo scheduling module found[27],[31]0/10
- Maintenance work ordersWork orders in an integrated CMMS[32]3/10
- Spare-parts inventoryThrough ERP or MES integrations[29]2/10
- Own hardwareIts own IIoT device 3.0 (“Manufacturer Evocon OÜ”); sensors bought in[33]8/10
- Published pricingPer-machine prices on its pricing page[27]10/10

Whole plant 41

- Cost$4,490 to $4,990 per line, once; no recurring fees[34],[35]8/10
- Time to first data“8 hours” to get up and running; “less than a day”[36],[37]8/10
- Machine versatilityOne or two inputs from an existing photo-eye, relay, switch or encoder[38]6/10
- Controller dataPLC data through the partner add-on Data Link PLC[39]4/10
- Setup and IT effortWired inputs, plus wired Ethernet with an IP address[38]6/10
- SchedulingThrough a partner integration[39]2/10
- Maintenance work ordersNo maintenance module found[36]0/10
- Spare-parts inventoryNo inventory module found[36]0/10
- Own hardware“We are NOT a distributor”: its own XL appliance; the sensors are yours[38],[40]8/10
- Published pricingModel prices on its website[34]10/10

Whole plant 45

- Cost$29,000 a year per 13 machines on its AWS listing, plus a $1,462.50 edge kit[41],[42]6/10
- Time to first data2–4 weeks from first contact to first data[43]4/10
- Machine versatilityCNC controls first; non-CNC machines on I/O, “a fallback”[44]5/10
- Controller dataMTConnect, FOCAS, OPC-UA, EtherNet/IP, S7, Modbus and more[45]10/10
- Setup and IT effortCable and static IP per machine, control options, firewall ports, IT[43],[46]3/10
- SchedulingAdd-on MES Module: drag-and-drop, auto-sequencing by due date[41],[47]8/10
- Maintenance work ordersWork orders in MaintainX, Fiix or UpKeep through an integration[48]3/10
- Spare-parts inventory“Your ERP stays the system of record” for inventory[49]2/10
- Own hardwareAn OnLogic PC on balenaOS, Sealevel I/O modules and Greystone current transducers, from its shop[42],[50],[51]2/10
- Published pricingNone on its website; prices on its AWS Marketplace listing[41],[52]3/10

Why plants look

## Why plants look past Guidewheel in its own words.

- **Power, not process.** “It reads power, not process. No temperatures, pressures, recipe parameters or controller tags.”[5]
- **Idle can read as running.** Machines that keep hydraulics, heaters or drives energised between parts can read as running until the thresholds are tuned.[5]
- **Part counts on another sensor.** Part counting is a data source layered on top of the current meters.[8]
- **No work orders, no health score.** It “does not raise work orders”, holds no inventory, and “is not predictive maintenance”.[5]
- **Three prices.** A custom quote on its pricing page, from $15,000 a year for 10 machines on its landing pages before hardware and installation, about $32K per plant a year on one of its comparison pages.[1],[2],[3],[9]
- **Renewals that rise.** A one-year term that renews itself, with renewal increases of up to 7% a year.[2]

**When to stay:** machine state on any machine that uses power, “regardless of age, make, or model”, with a starting price on its landing pages.[1],[10]

1. IoTFlows · Whole plant score 94

## Any machine, with maintenance and parts built in

A [SenseAi](https://www.iotflows.com/products/senseai) attaches magnetically in seconds and calibrates in under five minutes, on any machine of any age, and counts parts from the same sensor. [Maintenance work orders, spare parts](https://www.iotflows.com/platform/maintain) and the [Production Scheduler](https://www.iotflows.com/platform/production-scheduler) run on the same platform.

**Price:** SenseAi $149 per machine, once, and Pro at $119 a month billed monthly, less on longer terms. Controller data through the edge device on [Enterprise](https://www.iotflows.com/platform/custom-integrations).

[See how it works](https://www.iotflows.com/platform/machine-monitoring)

The other six

## The other alternatives, at a glance.

In no ranked order. Ticks and dashes come from each company’s ratings above; every line from its own pages.

- ### FourJaw

Clamp sensors, priced in pounds

44score

£72

per machine a month on Standard, billed annually, plus £200 per MachineLink[11]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: Utilization at a low per-machine price[11]
- ### Amper (ECI)

Electrical sensors on cellular

56score

48 h

to live data after hardware arrives[15]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: Sensors on their own cellular link, priced by quote[14],[15]

Part of ECI Software Solutions since its acquisition, announced December 9, 2025[17]
- ### Pulsar

Current sensors and a hub

29score

1 visit

to install; data within a few days[18],[19]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: Plants in Mexico and Latin America, installed by its own team[21],[26]
- ### Evocon

Sensors on a shared device

44score

$189

and up, per machine a month, plus a $19–24 device per three machines; sensors extra[27],[28]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: Plants that want a published per-machine OEE price[27]
- ### Vorne XL

A line monitor, bought once

41score

$4,490

per line, once[34]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: One line or machine, with no subscription[34],[35]
- ### MachineMetrics

CNC control data

45score

$29,000

a year per 13 machines on AWS Marketplace, plus a $1,462.50 edge kit[41],[42]

Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

Best for: Automated machining, with control data on every machine[53]

How to pilot

## Test an alternative on the machines you already run.

- **The same machines, the same shifts.** Pick a cell that mixes old and new machines, and include the one everybody argues about.
- **Two weeks of both numbers.** Compare uptime and part counts side by side, shift by shift.
- **Check the reasons on the floor.** Walk the top three downtime reasons with the operators who logged them.
- **Count the work around it.** Note what still needs a spreadsheet, a second login or an IT ticket.

An IoTFlows pilot runs on 10 to 25 machines for four weeks, with no commitment to buy.

Customer story

## Criollos Foods raised bagging-line productivity 35%

Criollos Foods packs bagged and canned foods in Medley, Florida. BeamTracker counts every bag on its lines against a target of 30 bags a minute.

35%

more output on the bagging lines

92%

of lines hitting their target rate

20 min

faster product changeovers

### Challenge

Some operators ran a line at 20 bags a minute against a target of 30, and nobody could see who, on which product, or why. Changeovers between products went untimed.

### Solution

BeamTracker counts every bag and shows the live rate against target for every line, operator and product, with every stop classified. Supervisors coached the operators behind target and cut the slow changeovers.

### Products

[BeamTracker](https://www.iotflows.com/products/beamtracker) and [SenseAi](https://www.iotflows.com/products/senseai).

[Read the Criollos Foods story](https://www.iotflows.com/customers/criollos-foods)

> “Within weeks of targeted coaching based on the IoTFlows data, our newer operators were hitting 30 bags per minute. This platform has transformed how we manage our bagging operations.”

Juan Perez, Warehouse Operations Manager, Criollos Foods

Altium Packaging reads first pass yield live at every step of its ten bottling lines. [Read the Altium Packaging story](https://www.iotflows.com/customers/altium-packaging). [Storm Power Components](https://www.iotflows.com/customers/storm-power-components) doubled machine utilization, and [Hilco Vision](https://www.iotflows.com/customers/hilco-vision) knows by mid-afternoon where a shift will land.

## Questions people ask

### What are the best Guidewheel alternatives?

It depends on what your plant needs beyond machine state. IoTFlows designs its own vibration sensor, which counts parts and scores machine health, and adds maintenance work orders, spare-parts inventory and a production scheduler, with published prices (Pro is $119 per machine a month billed monthly). FourJaw clamps current sensors at a low published price; Amper, now part of ECI, uses electrical sensors over cellular; Pulsar installs current sensors and a hub in one visit; Evocon publishes per-machine OEE pricing; Vorne XL sells one line’s monitor outright; MachineMetrics reads CNC controls.

### What can current sensing not see?

Guidewheel’s own page lists it: it reads power, not process, with no temperatures, pressures, recipe parameters or controller tags; machines that keep hydraulics, heaters or drives energised between parts can read as running when idle until thresholds are tuned; and it is not predictive maintenance. SenseAi reads vibration, so the cut and the pause between parts look different to the sensor, parts are counted from the same signal, and SenseAi Embedded scores machine health.

### Which Guidewheel alternatives count parts?

IoTFlows counts parts from the same SenseAi that reports running and stopped, and BeamTracker counts units on a line. Guidewheel layers part counting on as an additional data source, and Pulsar’s docs say totals need a count sensor mapped on the machine, on its OEE Pro plan.

### Which Guidewheel alternatives include maintenance work orders?

Of the eight, IoTFlows includes maintenance work orders and spare-parts inventory in the same platform as monitoring: Maintain opens a work order from a downtime, an event, a meter or a request, and Inventory moves the parts when it closes. Amper sells maintenance management as an add-on module; MachineMetrics and Evocon connect to a separate CMMS; Guidewheel says it does not raise work orders.

### Who makes Guidewheel’s hardware?

Its terms say any hardware it provides is purchased by Guidewheel on behalf of the customer from third-party suppliers. IoTFlows designs SenseAi, SenseAi Embedded and BeamTracker itself, the electronics, housing and firmware, with signed updates over the air, and Evocon and Vorne name themselves maker of their devices.

### What does Guidewheel cost?

Its own pages give three answers: a custom quote on its pricing page, from $15,000 a year including the first 10 machines on its landing pages, and about $32K per plant a year on one of its comparison pages. Its terms set a one-year term that renews itself, with renewal increases of up to 7% a year, and let customers lease or buy the hardware. Neither the hardware nor installation has a published price: both go on the order form, and unless it includes installation, the customer installs the hardware.

### How long does switching from Guidewheel take?

A SenseAi attaches magnetically in seconds and calibrates in under five minutes, and it mounts on the outside of the machine with no connection to the power leads, the control or the electrical cabinet, so IoTFlows can run beside Guidewheel during a pilot: 10 to 25 machines for four weeks, with no commitment to buy.

### How are the scores calculated?

Each company is rated from 0 to 10 on ten criteria (cost, time to first data, machine versatility, controller data, setup and IT effort, scheduling, maintenance work orders, spare-parts inventory, own hardware and published pricing) on one written rubric, using only facts from its own website, docs and price pages. Your weights decide how much each rating counts: the score is the weighted average of the ratings, times ten. The rubric and the fact behind every rating are on the page, with sources.

## Other comparisons

- [IoTFlows vs GuidewheelMore than a power reading: part counts, machine health, maintenance.](https://www.iotflows.com/compare/iotflows-vs-guidewheel)
- [Pulsar (pulsarml.com) alternativesSeven options, starting with who builds the hardware.](https://www.iotflows.com/compare/pulsar-alternatives)
- [MachineMetrics alternativesSeven options, scored on what a CNC shop needs.](https://www.iotflows.com/compare/machinemetrics-alternatives)
- [All comparisonsIoTFlows against other platforms and approaches.](https://www.iotflows.com/compare)

## Documentation

Want the detail? These guides walk through each feature step by step.

- [Install and power up SenseAiWhere to mount it, and how to check the mount.](https://www.iotflows.com/docs/hardware/install-senseai)
- [Choose a machine health baselineHealth scores against the machine’s own normal.](https://www.iotflows.com/docs/monitoring/baseline-profiles)
- [Maintain overviewWork orders from downtimes, events, meters and requests.](https://www.iotflows.com/docs/maintain/overview)

## Try the alternative on your floor

Start with 10 to 25 machines for four weeks, with no commitment to buy. A SenseAi goes on the machines you already run.

## Sources

Every statement about another company on this page comes from that company’s own public pages, read on the dates listed below. Pages change: [tell us](https://www.iotflows.com/company/support) if something here is out of date and we will correct it. Product names are trademarks of their owners.

- [1]#1 OEE Monitoring Software[www.guidewheel.com/lp/oee](https://www.guidewheel.com/lp/oee)Read October 13, 2026
- [2]Guidewheel: Terms and Conditions of Use[www.guidewheel.com/terms-and-conditions](https://www.guidewheel.com/terms-and-conditions)Read October 13, 2026
- [3]Guidewheel Pricing: Simple, Scalable Plans for Smarter FactoryOps[www.guidewheel.com/pricing](https://www.guidewheel.com/pricing)Read October 13, 2026
- [4]llms.txt (Guidewheel)[www.guidewheel.com/llms.txt](https://www.guidewheel.com/llms.txt)Read October 13, 2026
- [5]Guidewheel | When Guidewheel Is Not the Right Tool[www.guidewheel.com/blog/guidewheel-not-right-tool](https://www.guidewheel.com/blog/guidewheel-not-right-tool)Read October 13, 2026
- [6]Set up for IT teams | Guidewheel Help Center[support.guidewheel.app/en/articles/8365555-set-up-for-it-teams](https://support.guidewheel.app/en/articles/8365555-set-up-for-it-teams)Read October 13, 2026
- [7]Guidewheel | Production Tracking, Scheduling & Management Software Compared[www.guidewheel.com/blog/production-tracking-software-compared](https://www.guidewheel.com/blog/production-tracking-software-compared)Read October 13, 2026
- [8]Guidewheel: Continuously Improve Factory Performance with Data[www.guidewheel.com/solutions/continuously-improve](https://www.guidewheel.com/solutions/continuously-improve)Read October 13, 2026
- [9]Guidewheel vs Vorne[www.guidewheel.com/vs/vorne](https://www.guidewheel.com/vs/vorne)Read October 13, 2026
- [10]Guidewheel: Prevent Unplanned Downtime with FactoryOps[www.guidewheel.com/solutions/reduce-downtime](https://www.guidewheel.com/solutions/reduce-downtime)Read October 13, 2026
- [11]Machine Monitoring Software Pricing | FourJaw[fourjaw.com/pricing](https://fourjaw.com/pricing)Read October 13, 2026
- [12]FourJaw Machine Monitoring System | Manufacturing Analytics Software[fourjaw.com/intro-to-fourjaw/hardware](https://fourjaw.com/intro-to-fourjaw/hardware)Read October 13, 2026
- [13]FourJaw Machine Monitoring Platform Features | FourJaw[fourjaw.com/features](https://fourjaw.com/features)Read October 13, 2026
- [14]Amper Pricing | Production Monitoring Software for Manufacturers[www.ecisolutions.com/products/amper/pricing/](https://www.ecisolutions.com/products/amper/pricing/)Read October 13, 2026
- [15]Amper Features | Production Monitoring, Scheduling & Reporting[www.ecisolutions.com/products/amper/features/](https://www.ecisolutions.com/products/amper/features/)Read October 13, 2026
- [16]Production Monitoring Software - Real-Time Manufacturing Data[www.ecisolutions.com/products/amper/](https://www.ecisolutions.com/products/amper/)Read October 13, 2026
- [17]ECI Software Solutions Acquires Amper Technologies, Increasing AI-Driven Operational Efficiency for Manufacturers[www.ecisolutions.com/news/eci-software-solutions-acquires-amper-technologies/](https://www.ecisolutions.com/news/eci-software-solutions-acquires-amper-technologies/)Read October 13, 2026
- [18]Manufacturing intelligence platform | Pulsar[www.pulsarml.com/en](https://www.pulsarml.com/en)Read October 13, 2026
- [19]Manufacturing monitoring platform for productivity | Pulsar[www.pulsarml.com/en/manufacturing-monitoring-platform-productivity](https://www.pulsarml.com/en/manufacturing-monitoring-platform-productivity)Read October 13, 2026
- [20]Alerts | Pulsar Docs[docs.pulsarml.com/guides/settings/alerts/](https://docs.pulsarml.com/guides/settings/alerts/)Read October 13, 2026
- [21]Hardware for manufacturing data collection | Pulsar[www.pulsarml.com/en/hardware-manufacturing-data-collection](https://www.pulsarml.com/en/hardware-manufacturing-data-collection)Read October 13, 2026
- [22]Machine running but showing 0% | Pulsar Docs[docs.pulsarml.com/guides/support/machine-running-at-zero/](https://docs.pulsarml.com/guides/support/machine-running-at-zero/)Read October 14, 2026
- [23]Shift schedules | Pulsar Docs[docs.pulsarml.com/guides/settings/shift-schedules/](https://docs.pulsarml.com/guides/settings/shift-schedules/)Read October 13, 2026
- [24]MES Software and Production Systems | Pulsar[www.pulsarml.com/en/blog/mes-software-production-systems](https://www.pulsarml.com/en/blog/mes-software-production-systems)Read October 13, 2026
- [25]Machine with no data | Pulsar Docs[docs.pulsarml.com/guides/support/machine-without-data/](https://docs.pulsarml.com/guides/support/machine-without-data/)Read October 13, 2026
- [26]Our team and their Industry 4.0 journey | Pulsar[www.pulsarml.com/en/about-us](https://www.pulsarml.com/en/about-us)Read October 13, 2026
- [27]Evocon OEE software pricing is simple and adaptable | Evocon[evocon.com/pricing/](https://evocon.com/pricing/)Read October 13, 2026
- [28]What Hardware You Need and Does Evocon Provide It? | Evocon[evocon.com/articles/what-hardware-you-need-evocon/](https://evocon.com/articles/what-hardware-you-need-evocon/)Read October 13, 2026
- [29]Frequently Asked Questions (FAQ) | Evocon[evocon.com/faq/](https://evocon.com/faq/)Read October 13, 2026
- [30]How Evocon works and how to get started? | Evocon[evocon.com/how-evocon-works/](https://evocon.com/how-evocon-works/)Read October 13, 2026
- [31]OEE software. Easy to use. Easy to understand. | Evocon[evocon.com/oee-software/](https://evocon.com/oee-software/)Read October 13, 2026
- [32]CMMS Integrations with Evocon OEE Software | Evocon[evocon.com/articles/evocon-cmms-integrations/](https://evocon.com/articles/evocon-cmms-integrations/)Read October 13, 2026
- [33]Hardware - Evocon IIoT device 3.0 - Technical specification and user manual[support.evocon.com/Hardware-Evocon-IIoT-device-3-0-Technical-specification-and-user-manual-5de6b32b4b8941a7beeb897d33327035](https://support.evocon.com/Hardware-Evocon-IIoT-device-3-0-Technical-specification-and-user-manual-5de6b32b4b8941a7beeb897d33327035)Read October 13, 2026
- [34]XL Production Monitors: Models & Pricing | Vorne[www.vorne.com/products/models/](https://www.vorne.com/products/models/)Read October 13, 2026
- [35]XL Touch Productivity Appliance | Vorne[www.vorne.com/products/xl/models/xl-touch/](https://www.vorne.com/products/xl/models/xl-touch/)Read October 13, 2026
- [36]XL Productivity Appliance™ Production Monitoring System | Vorne[www.vorne.com/products/xl/](https://www.vorne.com/products/xl/)Read October 13, 2026
- [37]Machine Monitoring in Manufacturing | Vorne[www.vorne.com/solutions/applications/machine-monitoring/](https://www.vorne.com/solutions/applications/machine-monitoring/)Read October 13, 2026
- [38]Real-Time Production Monitoring System | Vorne[www.vorne.com/](https://www.vorne.com/)Read October 13, 2026
- [39]Vorne XL Integration Tools | Vorne[www.vorne.com/products/integration-tools/](https://www.vorne.com/products/integration-tools/)Read October 13, 2026
- [40]About Us | Vorne[www.vorne.com/about-us/about/](https://www.vorne.com/about-us/about/)Read October 13, 2026
- [41]MachineMetrics | AWS Marketplace[aws.amazon.com/marketplace/pp/prodview-ulq6ggds456oe](https://aws.amazon.com/marketplace/pp/prodview-ulq6ggds456oe)Read October 13, 2026
- [42]Hardware Shop[shop.machinemetrics.com/](https://shop.machinemetrics.com/)Read October 13, 2026
- [43]Quick Start Checklist | MachineMetrics[docs.machinemetrics.com/docs/getting-started/quick-start-checklist](https://docs.machinemetrics.com/docs/getting-started/quick-start-checklist)Read October 13, 2026
- [44]Digital I/O Connectivity | MachineMetrics[docs.machinemetrics.com/docs/machine-connectivity/digital-io](https://docs.machinemetrics.com/docs/machine-connectivity/digital-io)Read October 13, 2026
- [45]CNC Machine Connectivity Software | MachineMetrics[www.machinemetrics.com/machine-connectivity](https://www.machinemetrics.com/machine-connectivity)Read October 13, 2026
- [46]Network Requirements | MachineMetrics[docs.machinemetrics.com/docs/getting-started/network-requirements](https://docs.machinemetrics.com/docs/getting-started/network-requirements)Read October 13, 2026
- [47]Production Scheduling Software | MachineMetrics[www.machinemetrics.com/production-scheduling-software](https://www.machinemetrics.com/production-scheduling-software)Read October 13, 2026
- [48]Machine Condition Monitoring Software | MachineMetrics[www.machinemetrics.com/condition-monitoring](https://www.machinemetrics.com/condition-monitoring)Read October 13, 2026
- [49]MES & ERP Integrations for Manufacturers | MachineMetrics[www.machinemetrics.com/erp-integrations](https://www.machinemetrics.com/erp-integrations)Read October 13, 2026
- [50]Pigtail Power Cable / Edge Kit (CL210) | MachineMetrics Hardware Shop[shop.machinemetrics.com/product/edge-kit-onlogic/](https://shop.machinemetrics.com/product/edge-kit-onlogic/)Read October 13, 2026
- [51]Hardware Buying Guide | MachineMetrics[docs.machinemetrics.com/docs/getting-started/hardware-buying-guide](https://docs.machinemetrics.com/docs/getting-started/hardware-buying-guide)Read October 13, 2026
- [52]Pricing[www.machinemetrics.com/pricing](https://www.machinemetrics.com/pricing)Read October 13, 2026
- [53]Introducing MaximaOS, the Manufacturing Operations Management Platform[www.machinemetrics.com/blog/introducing-maximaos-the-manufacturing-operations-management-platform](https://www.machinemetrics.com/blog/introducing-maximaos-the-manufacturing-operations-management-platform)Read October 13, 2026