Skip to main content
Shopping cart is empty
IoTFlows Logo
IoTFlows Logo
Sign In

Compare

Amper by ECI alternatives, compared from each vendor’s own pages

Seven options for shops weighing Amper, scored on what your shop cares about, starting with a price you can see. Every rating rests on the company’s own published facts.

Score them yourself

Filters drawn from each company’s ratings below, from its own published facts.

The short answer

Which alternative fits your shop? Start with what you can see before you sign.

  • 01

    Want a price before the demo?

    All four publish prices on their own sites.[13],[39],[46] Amper’s pricing page is a custom quote, with hardware, onboarding, training and support in it.[1]

    Best fitIoTFlowsIoTFlowsEvoconEvoconVorneVorne XLFourJawFourJaw
  • 02

    Running older or mixed machines?

    A sensor reads a 1990s lathe or a manual mill from the outside. Amper: “If a machine uses power, Amper can monitor it.”[2]

    Best fitIoTFlowsIoTFlowsAmper by ECIAmper (ECI)GuidewheelGuidewheelFourJawFourJaw
  • 03

    Want maintenance and spare parts in one system?

    Maintain and Inventory come on the same platform. Amper sells maintenance management as an add-on module, and inventory stays in the ERP it feeds.[2],[3]

    Best fitIoTFlowsIoTFlows
  • 04

    Need a schedule for the floor?

    All three sell scheduling as an add-on module.[3],[22] IoTFlows’ Production Scheduler adds automatic sequencing to drag and drop.

    Best fitIoTFlowsIoTFlowsMachineMetricsMachineMetricsAmper by ECIAmper (ECI)
  • 05

    Want hardware built for the job?

    IoTFlows designs its sensors, firmware and all. Evocon and Vorne name themselves maker of their devices.[45],[52] Amper’s own pages don’t name the maker of its sensors.[3]

    Best fitIoTFlowsIoTFlowsEvoconEvoconVorneVorne XL
  • 06

    Need controller data too?

    MachineMetrics and Datanomix read CNC controls natively.[20],[32] IoTFlows adds MTConnect, OPC UA and more on Enterprise, beside the sensor. Amper lists PLC integrations.[3]

    Best fitMachineMetricsMachineMetricsDatanomixDatanomixIoTFlowsIoTFlows

Before you sign

A pilot on your machines, at prices you can see

An IoTFlows pilot runs on 10 to 25 of your machines for four weeks, at the prices on our website, with no commitment to buy. The sensors you pilot on are the ones you keep.

Amper by ECI

Its free trial validates hardware on 2 machines and asks for an executive sponsor, a project owner and interest in scaling to 25+ machines. The price is a custom quote.[1],[4]

IoTFlows vs Amper

Score them yourself

What matters to your shop? Set it, and the ranking follows.

Pick a preset, or drag any bar to set how much it matters, 0 to 10.

7
6
6
8
6
5
5
3
5
3

Your ranking

CNC job shop · out of 100

  1. Rank 1IoTFlowsIoTFlows92
  2. Rank 2Amper by ECIAmper (ECI)58
  3. Rank 8GuidewheelGuidewheel38
  4. Rank 5FourJawFourJaw52
  5. Rank 6MachineMetricsMachineMetrics51
  6. Rank 3DatanomixDatanomix53
  7. Rank 7EvoconEvocon50
  8. Rank 4VorneVorne XL53

Every company is rated 0 to 10 on each line, from its own published facts; your weights decide how much each rating counts. If controller data is all you need, MachineMetrics comes first. The facts behind every rating are just below.

Behind the scores

Every rating, with its source. Open any company.

How each criterion is rated
Cost · Lowest published plan, with required hardware spread over three years.
10Under $100 per machine a month8$100 to $1496$150 to $1995Not published
Time to first data · The slowest figure the vendor publishes.
10Minutes8Within a day or two7Days4Weeks
Machine versatility · How many of a mixed floor’s machines it reads, and how.
10Any machine, mounted on the outside8Any powered machine, sensor on its power cables6Machines with a signal to wire in5CNC controls first, others on a fallback4CNC controls; state only on others
Controller data · Program, alarm and count data read from the control itself.
10CNC controls and PLCs, natively8CNC controls, natively6Controls and PLCs as an add-on project5PLC integration offered4PLC tags through a partner add-on3One PLC output through a relay0None
Setup and IT effort · Higher means less work for maintenance and plant IT.
10Mounts outside; no electrical or network work8Clamps on power cables; cellular option6Wired inputs or a device per control, plant network3Cable and static IP per machine, firewall ports, IT
Scheduling · Included or as an add-on.
8Drag-and-drop with automatic sequencing6Job planning or a scheduling module4Work lists and CSV import2Through a partner0None found
Maintenance work orders · Included or as an add-on.
10A full CMMS built in7A maintenance module4Planned-maintenance tracking plus CMMS links3Through a separate CMMS0None found
Spare-parts inventory · Included or as an add-on.
10Built in, moved by work orders3Tooling only2Through the ERP0None found
Own hardware · Who designs the device that reads your machine, from its own pages.
10Designs its sensing device and the firmware on it8Designs its own logger or appliance; sensors bought in or the customer’s6Its own hub around stock parts; relay or router off the shelf5Not published on its own pages2Third-party devices
Published pricing · Can you see the price before a demo?
10Full prices on its website6A starting price on landing pages3Only on a marketplace listing0Not published
IoTFlowsIoTFlowsCNC job shop 92
  • CostFrom under $100 per machine a month on longer terms; SenseAi $149 once10/10
  • Time to first dataCalibrates in under five minutes and reports right away10/10
  • Machine versatilityA magnetic sensor on any machine, of any age or brand10/10
  • Controller dataMTConnect, OPC UA and more through the edge device, on Enterprise6/10
  • Setup and IT effortMounts magnetically; the 4G/LTE router keeps it off the plant network10/10
  • SchedulingProduction Scheduler add-on: Gantt, optimizer, simulation8/10
  • Maintenance work ordersMaintain: work orders, preventive schedules, meters, requests10/10
  • Spare-parts inventoryInventory: parts leave stock when a work order closes10/10
  • Own hardwareSenseAi, SenseAi Embedded and BeamTracker are designed by IoTFlows, firmware and all10/10
  • Published pricingDevice and plan prices on the pricing page10/10
Amper by ECIAmper (ECI)CNC job shop 58
  • CostCustom quote, hardware included[1]5/10
  • Time to first dataLive data within 48 hours of receiving hardware[2]8/10
  • Machine versatilityNon-invasive electrical sensors; no PLC needed[2]8/10
  • Controller dataPLC integrations among its capture options[3]5/10
  • Setup and IT effortElectrical sensors on encrypted cellular; no plant network[2]8/10
  • SchedulingScheduling add-on module[3]6/10
  • Maintenance work ordersMaintenance management add-on: tickets from machine data[3]7/10
  • Spare-parts inventoryInventory only as ERP data it feeds[2]2/10
  • Own hardwareMaker of its sensors and boxes not published on its own pages[3]5/10
  • Published pricingA custom-quote page, no price[1]0/10
GuidewheelGuidewheelCNC job shop 38
  • CostFrom $15,000 a year for 10 machines before hardware and installation, which go on the order form at prices not published[6],[7]5/10
  • Time to first data“As little as a day”[8]8/10
  • Machine versatilityClip-on current sensors on the power leads[9]8/10
  • Controller data“It reads power, not process”: no controller tags[10]0/10
  • Setup and IT effortClip-on meters; LTE meters need no plant network[9],[11]8/10
  • SchedulingLeft to the ERP[12]0/10
  • Maintenance work orders“Does not raise work orders”[10]0/10
  • Spare-parts inventoryNo inventory[10]0/10
  • Own hardwareIts terms: hardware “purchased … from third party suppliers”[7]2/10
  • Published pricingA starting price on landing pages; a custom quote on its pricing page[6],[8]6/10
FourJawFourJawCNC job shop 52
  • Cost£72 per machine a month billed annually, plus £200 per MachineLink[13]10/10
  • Time to first data10 to 20 minutes per machine; data within days[14]7/10
  • Machine versatilitySensors clipped around the power cables[14]8/10
  • Controller dataNo connection to the controller[14]0/10
  • Setup and IT effortFitted by your electrician; a managed 4G gateway option[13],[14]8/10
  • SchedulingWork lists and CSV import[13]4/10
  • Maintenance work ordersNo maintenance work orders found[15]0/10
  • Spare-parts inventoryNo inventory found[15]0/10
  • Own hardwareMaker of its MachineLink and SensorBox not published on its own pages[14]5/10
  • Published pricingPer-machine prices on its pricing page, in pounds[13]10/10
MachineMetricsMachineMetricsCNC job shop 51
  • Cost$29,000 a year per 13 machines on its AWS listing, plus a $1,462.50 edge kit[16],[17]6/10
  • Time to first data2–4 weeks from first contact to first data[18]4/10
  • Machine versatilityCNC controls first; non-CNC machines on I/O, “a fallback”[19]5/10
  • Controller dataMTConnect, FOCAS, OPC-UA, EtherNet/IP, S7, Modbus and more[20]10/10
  • Setup and IT effortCable and static IP per machine, control options, firewall ports, IT[18],[21]3/10
  • SchedulingAdd-on MES Module: drag-and-drop, auto-sequencing by due date[16],[22]8/10
  • Maintenance work ordersWork orders in MaintainX, Fiix or UpKeep through an integration[23]3/10
  • Spare-parts inventory“Your ERP stays the system of record” for inventory[24]2/10
  • Own hardwareAn OnLogic PC on balenaOS, Sealevel I/O modules and Greystone current transducers, from its shop[17],[25],[26]2/10
  • Published pricingNone on its website; prices on its AWS Marketplace listing[16],[27]3/10
DatanomixDatanomixCNC job shop 53
  • CostNo price published[29]5/10
  • Time to first dataOnsite install on day 7 of its plan; data live on install day[30],[31]7/10
  • Machine versatilityCNC controls; an amp clamp gives state only on legacy machines[29],[32]4/10
  • Controller dataCNC controls over Ethernet, Wi-Fi or serial[32]8/10
  • Setup and IT effortPlugs into each CNC control, the machine’s computer, on the shop Wi-Fi[29]6/10
  • SchedulingDelivery Track and Job Planning[33],[34]6/10
  • Maintenance work ordersPlanned-maintenance dashboard; CMMS connections[35],[36]4/10
  • Spare-parts inventoryTooling only[37]3/10
  • Own hardwareEdge device maker not published; its legacy kit is “Third Party Hardware”[38]5/10
  • Published pricingNo pricing page[29],[36]0/10
EvoconEvoconCNC job shop 50
  • Cost$189 to $379 per machine a month, plus a $19 to $24 device per three machines[39],[40]6/10
  • Time to first data“A few days, in three steps”[41]7/10
  • Machine versatilityA new or existing sensor, or a PLC output through a relay[41]6/10
  • Controller dataOne PLC output through a relay[41]3/10
  • Setup and IT effortIts device on Ethernet or Wi-Fi, plus power[42]6/10
  • SchedulingNo scheduling module found[39],[43]0/10
  • Maintenance work ordersWork orders in an integrated CMMS[44]3/10
  • Spare-parts inventoryThrough ERP or MES integrations[41]2/10
  • Own hardwareIts own IIoT device 3.0 (“Manufacturer Evocon OÜ”); sensors bought in[45]8/10
  • Published pricingPer-machine prices on its pricing page[39]10/10
VorneVorne XLCNC job shop 53
  • Cost$4,490 to $4,990 per line, once; no recurring fees[46],[47]8/10
  • Time to first data“8 hours” to get up and running; “less than a day”[48],[49]8/10
  • Machine versatilityOne or two inputs from an existing photo-eye, relay, switch or encoder[50]6/10
  • Controller dataPLC data through the partner add-on Data Link PLC[51]4/10
  • Setup and IT effortWired inputs, plus wired Ethernet with an IP address[50]6/10
  • SchedulingThrough a partner integration[51]2/10
  • Maintenance work ordersNo maintenance module found[48]0/10
  • Spare-parts inventoryNo inventory module found[48]0/10
  • Own hardware“We are NOT a distributor”: its own XL appliance; the sensors are yours[50],[52]8/10
  • Published pricingModel prices on its website[46]10/10

Why shops look

Why shops look past Amper in its own words.

  • No price on its site. Its pricing page is a custom quote.[1]
  • A trial with conditions. Its free trial validates hardware on 2 machines; the pilot asks for an executive sponsor, a project owner and interest in scaling to 25+ machines.[4]
  • Modules on top. Scheduling, the operator interface, issue management and maintenance management are add-on modules.[3]
  • Quality by hand. Operators capture downtime, scrap and setups on a touchscreen.[3]
  • Spare parts elsewhere. Inventory appears only as ERP data it feeds.[2]

When to stay: shops already running an ECI ERP such as JobBOSS² or M1 that want monitoring from the same company, with ERP integrations in every plan.[3],[5]

1. IoTFlows · CNC job shop score 92

Any machine, with maintenance and parts built in

A SenseAi attaches magnetically in seconds and calibrates in under five minutes, on any machine of any age, and counts parts from the same sensor. Maintenance work orders, spare parts and the Production Scheduler run on the same platform.

Price: SenseAi $149 per machine, once, and Pro at $119 a month billed monthly, less on longer terms. Controller data through the edge device on Enterprise.

See how it works

The other six

The other alternatives, at a glance.

In no ranked order. Ticks and dashes come from each company’s ratings above; every line from its own pages.

  • GuidewheelGuidewheel

    Clip-on current sensors

    38score

    $15,000

    a year for 10 machines, before hardware and installation[6],[7]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: Machine state on any powered machine, priced up front[6],[9]

  • FourJawFourJaw

    Clamp sensors, priced in pounds

    52score

    £72

    per machine a month on Standard, billed annually, plus £200 per MachineLink[13]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: Utilization at a low per-machine price[13]

  • MachineMetricsMachineMetrics

    CNC control data

    51score

    $29,000

    a year per 13 machines on AWS Marketplace, plus a $1,462.50 edge kit[16],[17]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: Automated machining, with control data on every machine[28]

  • DatanomixDatanomix

    CNC control data

    53score

    Day 1

    data on the install day[31]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: Networked CNCs, where control data matters most[32]

  • EvoconEvocon

    Sensors on a shared device

    50score

    $189

    and up, per machine a month, plus a $19–24 device per three machines; sensors extra[39],[40]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: Plants that want a published per-machine OEE price[39]

  • VorneVorne XL

    A line monitor, bought once

    53score

    $4,490

    per line, once[46]

    Published priceAny machineController dataSchedulingWork ordersSpare partsOwn hardware

    Best for: One line or machine, with no subscription[46],[47]

How to pilot

Test an alternative on the machines you already run.

  • The same machines, the same shifts. Pick a cell that mixes old and new machines, and include the one everybody argues about.
  • Two weeks of both numbers. Compare uptime and part counts side by side, shift by shift.
  • Check the reasons on the floor. Walk the top three downtime reasons with the operators who logged them.
  • Count the work around it. Note what still needs a spreadsheet, a second login or an IT ticket.

An IoTFlows pilot runs on 10 to 25 machines for four weeks, with no commitment to buy.

Customer story

Jesel answers machine issues in minutes, not days

Jesel builds valvetrain components on precision CNC machines in Lakewood, New Jersey, and reads its dashboard every morning.

Minutes
to respond to an issue, down from hours or days
100%
cycle time accuracy, actual against the bill of material
Daily
OEE and utilization on every CNC machine

Challenge

Jesel ran capable CNC machines but couldn’t see how well each one was performing. The cycle times in its bills of material were taken on faith, and setup or tooling problems surfaced only after they had caused scrap or rework.

Solution

SenseAi on every CNC machine puts OEE and utilization on one dashboard, shift by shift. The team compares actual cycle times with the bills of material every day and catches deviations while they can still be fixed.

Products

SenseAi, with ideal cycle times set per operation.

Read the Jesel story
Two Jesel camshaft cores, machined from bar stock, one with a bronze drive flange
Jesel
“The IoTFlows Machine Sensors continue to provide us with valuable real-time data that we rely on to measure machine utilization and overall equipment effectiveness (OEE). The dashboard has become an essential tool in our daily operations.”
Pete Gonella, Director of Manufacturing, Jesel

MiRus raised efficiency over 20% and ties every job in its ERP to the machining behind it.

Questions people ask

Other comparisons

Documentation

Want the detail? These guides walk through each feature step by step.

Try the alternative on your floor

Start with 10 to 25 machines for four weeks, with no commitment to buy. A SenseAi goes on the machines you already run.

Sources

Every statement about another company on this page comes from that company’s own public pages, read on October 13, 2026. Pages change: tell us if something here is out of date and we will correct it. Product names are trademarks of their owners.

  1. [1]Amper Pricing | Production Monitoring Software for Manufacturerswww.ecisolutions.com/products/amper/pricing/Read October 13, 2026
  2. [2]Amper Features | Production Monitoring, Scheduling & Reportingwww.ecisolutions.com/products/amper/features/Read October 13, 2026
  3. [3]Production Monitoring Software - Real-Time Manufacturing Datawww.ecisolutions.com/products/amper/Read October 13, 2026
  4. [4]Free Trial - Hardware Validation & Machine Configuration Pilotwww.ecisolutions.com/products/amper/free-trial/Read October 13, 2026
  5. [5]ECI Software Solutions Acquires Amper Technologies, Increasing AI-Driven Operational Efficiency for Manufacturerswww.ecisolutions.com/news/eci-software-solutions-acquires-amper-technologies/Read October 13, 2026
  6. [6]#1 OEE Monitoring Softwarewww.guidewheel.com/lp/oeeRead October 13, 2026
  7. [7]Guidewheel: Terms and Conditions of Usewww.guidewheel.com/terms-and-conditionsRead October 13, 2026
  8. [8]Guidewheel Pricing: Simple, Scalable Plans for Smarter FactoryOpswww.guidewheel.com/pricingRead October 13, 2026
  9. [9]llms.txt (Guidewheel)www.guidewheel.com/llms.txtRead October 13, 2026
  10. [10]Guidewheel | When Guidewheel Is Not the Right Toolwww.guidewheel.com/blog/guidewheel-not-right-toolRead October 13, 2026
  11. [11]Set up for IT teams | Guidewheel Help Centersupport.guidewheel.app/en/articles/8365555-set-up-for-it-teamsRead October 13, 2026
  12. [12]Guidewheel | Production Tracking, Scheduling & Management Software Comparedwww.guidewheel.com/blog/production-tracking-software-comparedRead October 13, 2026
  13. [13]Machine Monitoring Software Pricing | FourJawfourjaw.com/pricingRead October 13, 2026
  14. [14]FourJaw Machine Monitoring System | Manufacturing Analytics Softwarefourjaw.com/intro-to-fourjaw/hardwareRead October 13, 2026
  15. [15]FourJaw Machine Monitoring Platform Features | FourJawfourjaw.com/featuresRead October 13, 2026
  16. [16]MachineMetrics | AWS Marketplaceaws.amazon.com/marketplace/pp/prodview-ulq6ggds456oeRead October 13, 2026
  17. [17]Hardware Shopshop.machinemetrics.com/Read October 13, 2026
  18. [18]Quick Start Checklist | MachineMetricsdocs.machinemetrics.com/docs/getting-started/quick-start-checklistRead October 13, 2026
  19. [19]Digital I/O Connectivity | MachineMetricsdocs.machinemetrics.com/docs/machine-connectivity/digital-ioRead October 13, 2026
  20. [20]CNC Machine Connectivity Software | MachineMetricswww.machinemetrics.com/machine-connectivityRead October 13, 2026
  21. [21]Network Requirements | MachineMetricsdocs.machinemetrics.com/docs/getting-started/network-requirementsRead October 13, 2026
  22. [22]Production Scheduling Software | MachineMetricswww.machinemetrics.com/production-scheduling-softwareRead October 13, 2026
  23. [23]Machine Condition Monitoring Software | MachineMetricswww.machinemetrics.com/condition-monitoringRead October 13, 2026
  24. [24]MES & ERP Integrations for Manufacturers | MachineMetricswww.machinemetrics.com/erp-integrationsRead October 13, 2026
  25. [25]Pigtail Power Cable / Edge Kit (CL210) | MachineMetrics Hardware Shopshop.machinemetrics.com/product/edge-kit-onlogic/Read October 13, 2026
  26. [26]Hardware Buying Guide | MachineMetricsdocs.machinemetrics.com/docs/getting-started/hardware-buying-guideRead October 13, 2026
  27. [27]Pricingwww.machinemetrics.com/pricingRead October 13, 2026
  28. [28]Introducing MaximaOS, the Manufacturing Operations Management Platformwww.machinemetrics.com/blog/introducing-maximaos-the-manufacturing-operations-management-platformRead October 13, 2026
  29. [29]Datanomix FAQsdatanomix.io/faq/Read October 13, 2026
  30. [30]Datanomix Kick-Ass Coachingdatanomix.io/kick-ass-coaching/Read October 13, 2026
  31. [31]Machine Monitoring Pilot Program | Datanomixdatanomix.io/pilot-program/Read October 13, 2026
  32. [32]Production Monitoring Software for CNC Machine Shops | Datanomixdatanomix.io/production-monitoring/Read October 13, 2026
  33. [33]Delivery Track: Production Planning & On-Time Delivery | Datanomixdatanomix.io/delivery-track/Read October 13, 2026
  34. [34]Making More in 2025: Production Monitoring Release Highlightsdatanomix.io/2025/12/23/making-more-in-2025-production-monitoring-release-highlights/Read October 13, 2026
  35. [35]Machine Track: Machine Monitoring Software for CNC Shops | Datanomixdatanomix.io/machine-track/Read October 13, 2026
  36. [36]Make More with Datanomix Data-Powered Productiondatanomix.io/Read October 13, 2026
  37. [37]Tool Management Track: CNC Tool Life Tracking | Datanomixdatanomix.io/tool-management-track/Read October 13, 2026
  38. [38]SaaS Agreement - Datanomixdatanomix.io/saas-agreement/Read October 13, 2026
  39. [39]Evocon OEE software pricing is simple and adaptable | Evoconevocon.com/pricing/Read October 13, 2026
  40. [40]What Hardware You Need and Does Evocon Provide It? | Evoconevocon.com/articles/what-hardware-you-need-evocon/Read October 13, 2026
  41. [41]Frequently Asked Questions (FAQ) | Evoconevocon.com/faq/Read October 13, 2026
  42. [42]How Evocon works and how to get started? | Evoconevocon.com/how-evocon-works/Read October 13, 2026
  43. [43]OEE software. Easy to use. Easy to understand. | Evoconevocon.com/oee-software/Read October 13, 2026
  44. [44]CMMS Integrations with Evocon OEE Software | Evoconevocon.com/articles/evocon-cmms-integrations/Read October 13, 2026
  45. [45]Hardware - Evocon IIoT device 3.0 - Technical specification and user manualsupport.evocon.com/Hardware-Evocon-IIoT-device-3-0-Technical-specification-and-user-manual-5de6b32b4b8941a7beeb897d33327035Read October 13, 2026
  46. [46]XL Production Monitors: Models & Pricing | Vornewww.vorne.com/products/models/Read October 13, 2026
  47. [47]XL Touch Productivity Appliance | Vornewww.vorne.com/products/xl/models/xl-touch/Read October 13, 2026
  48. [48]XL Productivity Appliance™ Production Monitoring System | Vornewww.vorne.com/products/xl/Read October 13, 2026
  49. [49]Machine Monitoring in Manufacturing | Vornewww.vorne.com/solutions/applications/machine-monitoring/Read October 13, 2026
  50. [50]Real-Time Production Monitoring System | Vornewww.vorne.com/Read October 13, 2026
  51. [51]Vorne XL Integration Tools | Vornewww.vorne.com/products/integration-tools/Read October 13, 2026
  52. [52]About Us | Vornewww.vorne.com/about-us/about/Read October 13, 2026